Product ID:SN60 (SN60PB40) HYDRO-X/ALUSOL/ARAX
MSDS Date:03/11/1992
FSC:3439
NIIN:00F034397
MSDS Number: BTNMP

MULTICORE SOLDERS INC

1751 JAY ELL DR
RICHARDSON, TX 75081
US

Emergency Phone: 214-238-1224

Info Phone: 214-238-1224

Preparer: ROBERT L. GILBERT

Cage: 0YP31

MULTICORE SOLDERS INC

RICHARDSON, TX 75081 US

Telephone: 214-238-1224

Cage: 0YP31

LEAD, INORGANIC LEAD (GROUP 2-B CARCINOGEN BY IARC) *93-4*

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 35-40%

ACGIH TLV: 0.15 MG/CUM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

TIN (AS SN)

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 55-60%

OSHA PEL 2 MG/CUM

ACGIH TLV: 2.0 MG/CUM

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:VAPOR/FUMES MAY BE IRRITATING TO SKIN
, EYES & RESPIRATORY SYSTEM. CHRONIC OVEREXPOSURE TO LEAD MAY
RESULT IN DAMAGE TO BLOOD-FORMING, NERVOUS, URINARY & REPRODUCTIVE
SYSTEM. NOTE PHYSICIAN: LEAD & IT S INORGANIC COMPOUNDS ARE
NEUROTOXINS WHICH MAY PRODUCE NEUROPATHY.
Explanation of Carcinogenicity:SEE INGREDIENTS
Effects of Overexposure:ACUTE: WEAKNESS, VOMITING, LOSS OF APPETITE,
CONVULSIONS, STUPOR, COMA. CHRONIC: WEAKNESS, INSOMNIA,
HYPERTENSION, IRRITATION, HEADACHE, PARALYSIS.

First Aid:EYES: FLUSH W/COPIOUS QUANTITIES OF WATER. SKIN: WASH W/SOAP
& WATER. INHALATION: REMOVE FROM EXPOSURE. OBTAIN MEDICAL ATTENTION
IN ALL CASES.

Extinguishing Media:CO2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:USE FULL BODY PROTECTIVE CLOTHING, FULL FACE
PIECE & SCBA OPERATED IN A POSITIVE-PRESSURE MODE.
Unusual Fire/Explosion Hazard:DON'T USE WATER ON FIRES WHERE MOLTEN
METAL IS PRESENT. HIGH TEMPERATURES MAY PRODUCE HEAVY METAL FUMES,
DUST, VAPOR.

Spill Release Procedures:PARTICUALATE MATTER SHOULD BE STORED IN DRY
CONTAINERS FOR LATER DISPOSAL. DUST MATERIAL SHOULD BE VACUUMED/WET
SWEPT. DON'T USE COMPRESSED AIR/DRY SWEEPING AS A MEANS OF
CLEANING.

Handling and Storage Precautions:STORE IN DRY AREA.
Other Precautions:AVOID SKIN CONTACT. AVOID BREATHING SMOKE DURING
SOLDERING.

Respiratory Protection:AS SPECIFIED BY 29 CFR 1910.1025 (F) IF EXPOSURE
EXCEEDS PEL.
Ventilation:LOCAL EXHAUST: MECHANICAL (GENERAL): ADEQUATE.
Protective Gloves:IMPERVIOUS
Eye Protection:FACE SHIELD/SAFETY GLASSES
Other Protective Equipment:EYE WASH STATION
Work Hygienic Practices:DON'T EAT & DRINK/SMOKE IN WORK AREAS. WASH
HANDS THOROUGHLY BEFORE EATING/SMOKING & AFTER HANDLING SOLDER.
Supplemental Safety and Health

Melt/Freeze Pt:M.P/F.P Text:361.4F
Spec Gravity:8
Solubility in Water:INSOLUBLE
Appearance and Odor:GRAY METAL W/NEUTRAL ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:HIGH TEMPERATURE
Hazardous Decomposition Products:HEAVY METAL FUMES.

Waste Disposal Methods:DISPOSE OF IAW LOCAL, STATE & FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.